You’ve probably already patched a section. Maybe two. And now something else is leaking, backing up, or smelling like sewage in a completely different part of the house.
That’s how cast iron fails. It doesn’t give you one problem and stop—it gives you a decade of problems because the entire system is aging at the same rate.
When we replace your cast iron sewer pipe, you’re done. No more surprise backups on Sunday morning. No more calling a plumber every six months because another section corroded through. You get modern PVC or ABS piping that won’t rust, won’t crack from root intrusion, and won’t fill your crawlspace with sewer gas.
The real outcome isn’t just new pipes. It’s knowing your foundation isn’t sitting in wastewater. It’s not worrying every time you hear the toilet gurgle. It’s selling your home later without a failed inspection or a buyer walking away after the camera inspection.
Drain Wizard is a family-owned plumbing company serving Allenhurst and the rest of Brevard County for nearly two decades. We’re not a franchise with rotating techs—we’re a State Certified contractor (CFC1428379) with over 40 years of combined plumbing experience and 20 years of military service behind our work.
That military background shows up in how we run jobs: on time, no surprises, and done right the first time. We’ve handled hundreds of cast iron replacements across the Space Coast, and we know exactly how Florida’s humidity and salt air eat through these pipes faster than anywhere else in the country.
Allenhurst homeowners deal with the same issue we see in Rockledge, Cocoa, and Melbourne—older homes with pipes that were never designed to last this long in this climate. We’re the crew that shows up, explains what’s actually happening under your slab or in your crawlspace, and gives you a real number before we start.
First, we run a camera through your line. You’ll see exactly what we see—cracks, corrosion, root intrusion, whatever’s causing the problem. No guessing. If the pipe’s shot, we’ll show you why and map out where the damage is.
Next, we give you options. Full replacement if the system’s too far gone. Trenchless repair if only a section is damaged and the rest still has life. Pipe descaling if buildup is the issue and the cast iron itself is still intact. We’ll tell you what makes sense for your home and your budget.
Once you approve the work, we pull permits, schedule the job, and get it done fast. Most residential sewer line replacements take one to three days depending on access and length. We remove the old cast iron, install new piping from your house to the street or septic, test everything, and clean up the site.
After that, you’re done. We warranty the work, give you documentation for your records, and you move on with your life without worrying about your pipes.
Ready to get started?
Allenhurst sits right on the coast, which means your cast iron pipes are corroding faster than homes even 20 miles inland. Salt air accelerates rust. High humidity keeps moisture inside the pipes. And Florida’s acidic soil eats through the outside while waste eats through the inside.
If your home was built in the 1960s or 70s, your pipes are 50-plus years old. Cast iron lasts 25 to 30 years in Florida’s climate—maybe 40 if you’re lucky. That means you’re living on borrowed time, and the longer you wait, the more likely you are to wake up to a flooded bathroom or a yard full of sewage.
We see it constantly in Brevard County. Homeowners ignore the slow drain or the occasional backup until a pipe bursts under the slab and they’re looking at $15,000 in water damage plus the cost of the replacement they should’ve done two years earlier.
When we handle your cast iron sewer pipe replacement, you’re not just swapping old pipes for new ones. You’re protecting your foundation, your indoor air quality, and your property value. And if you’re dealing with an insurance claim, we’ll walk you through what’s covered and what’s not—because most policies in Florida won’t cover gradual corrosion, only sudden failures.
If your home was built before 1980 and you’ve never replaced the pipes, they probably need to go. But the real answer comes from a camera inspection.
We run a camera through your sewer line and look for cracks, corrosion, root intrusion, and buildup. If the pipe walls are thin, flaking, or pitted with rust, replacement is the right move. If you’re seeing frequent backups, slow drains throughout the house, sewage smells, or wet spots in the yard, those are all signs the system is failing.
Cast iron doesn’t fail all at once. It fails in sections. So even if one area seems fine, the rest of the system is the same age and will start breaking down soon. That’s why we recommend replacing the whole line when the damage is widespread—it saves you from doing this again in two years.
Trenchless repair works when the damage is localized and the rest of the pipe is still solid. We use pipe lining or pipe bursting to fix the problem without digging up your entire yard. It’s faster and less invasive.
Full replacement is what you need when the whole system is corroded. We excavate, remove the old cast iron, and install new PVC or ABS piping from your house to the street or septic connection. It’s more work upfront, but it’s the only way to actually solve the problem when the pipes are shot.
Most homes in Allenhurst with original cast iron need full replacement. Trenchless is great for newer systems or isolated damage, but it doesn’t make sense when you’re patching a 60-year-old pipe that’s going to fail somewhere else in six months.
Most residential jobs take one to three days depending on the length of the line, how deep it’s buried, and whether it’s under a slab or in a crawlspace.
If we’re replacing a sewer line from the house to the street, that’s typically a two-day job. Day one is excavation and removal. Day two is installation, testing, and backfill. If we’re also replacing drain lines under the house, add another day or two depending on access.
We pull permits before we start, so there’s no delay once we’re on-site. And we don’t leave your plumbing out of commission overnight—we make sure you have working toilets and drains at the end of each day until the job’s finished.
Probably not, but it depends on why the pipe failed. Most Florida homeowners policies don’t cover gradual wear and tear or corrosion. They’ll cover a sudden pipe burst that causes water damage, but not the cost of replacing the pipe itself.
If a pipe breaks and floods your house, your insurance might cover the water damage restoration—drywall, flooring, mold remediation—but you’re usually paying out of pocket for the plumbing work.
We’ve worked with dozens of homeowners navigating claims, and we’ll give you documentation and photos to submit to your insurance company. Some policies cover more than others, so it’s worth filing a claim even if you’re not sure. Just don’t expect them to pay for a full replacement if the pipe’s been slowly corroding for 20 years.
You can, but it’s going to cost you more in the long run. Cast iron pipes fail in sections because the whole system is aging at the same rate. When one section corrodes through, the rest aren’t far behind.
We’ve seen homeowners spend $2,000 here, $3,000 there, patching leaks and clearing backups for years before they finally replace the whole line. By that point, they’ve spent as much as a full replacement would’ve cost—and they’ve dealt with years of stress and emergency calls.
If the camera inspection shows widespread corrosion, replacing the system now saves you money and eliminates the constant worry. If it’s truly just one bad section and the rest looks solid, we’ll tell you that too. But in most pre-1975 homes, the entire system is compromised.
We cut them out and replace the damaged section. Tree roots grow into cast iron pipes through cracks and joints because they’re looking for water. Once they’re in, they expand and break the pipe apart from the inside.
Pipe descaling or hydro jetting can clear the roots temporarily, but they’ll grow back unless you fix the crack they’re coming through. If the pipe is old and brittle, cutting the roots out can cause more damage, which is why replacement is usually the better option.
When we install new PVC or ABS piping, the joints are sealed tight and roots can’t penetrate. That doesn’t stop them from wrapping around the outside of the pipe, but it keeps them from growing inside and clogging your line. If roots are already a problem, replacement is the permanent fix.
Local Resources
Useful Links
