You stop wondering when the next leak will happen. No more slow drains, sewage smells, or that sinking feeling every time you flush.
Your water pressure improves. Showers actually work the way they should. Laundry doesn’t take twice as long because your pipes can’t keep up.
You protect your home’s value instead of watching it drain away with every hidden leak. Buyers notice updated plumbing. Inspectors flag old cast iron. Replacing it now means you’re not scrambling during a sale or dealing with a $100,000 water damage claim because a pipe finally gave out under your slab.
Modern PVC doesn’t corrode. It lasts 50+ years in Florida’s climate without the rust, the buildup, or the constant worry. You fix it once and you’re done.
We work exclusively in Brevard County, where most homes were built between the 1960s and 1970s with cast iron that’s already past its lifespan. We know the slab foundations, the soil conditions, and the building codes here.
We’re licensed and insured, and we handle the permits and inspections that Brevard County requires for residential sewer line replacement. You’re not dealing with a national franchise that doesn’t understand local construction or a handyman who’s never pulled a permit.
We’ve seen what happens when cast iron fails under Williams Point homes. We’ve tunneled under slabs, replaced full systems, and worked with insurance claims when coverage applies. You’re hiring people who’ve done this specific job in this specific area more times than we can count.
We start with a camera inspection. A small camera goes into your existing pipes so you can see exactly what we’re looking at—cracks, corrosion, blockages, root intrusion. No guessing.
If your pipes are under a slab, we use hydro-excavation tunneling to access them without tearing up your floors. For some situations, trenchless sewer repair lets us reline the existing pipes without any excavation at all. We’ll tell you which method makes sense for your specific layout and damage level.
Once we access the failing cast iron pipes, we remove the old sections and install new PVC. We handle all the connections, make sure everything slopes correctly for drainage, and test the system before we close it up. Then we pull final inspections with the county so everything’s documented and code-compliant.
The timeline depends on how much pipe needs replacing and where it’s located, but most residential sewer line replacement projects in Williams Point take between three and seven days from start to final inspection.
Ready to get started?
You get a full camera inspection first, so you know what you’re paying for and why. We document everything and show you the footage. If your insurance might cover part of the damage, we provide the documentation you need for your claim.
We handle all permits and coordinate inspections with Brevard County. You don’t call the building department or wait around wondering if something’s going to pass. We know what inspectors look for because we work with them constantly.
The replacement itself includes removing all failing cast iron sections and installing new PVC that’s rated for Florida’s climate. We connect to your existing system, test for leaks, and make sure water flows and drains the way it should. If we had to tunnel under your slab, we restore access points so you’re not left with open holes or temporary patches.
Williams Point homes often have unique challenges—tight crawl spaces, complex layouts, or older construction that doesn’t match current standards. We adapt to what your home actually looks like, not what a textbook says it should be. And if we find additional issues during the work, we tell you before we proceed, not after.
Most full cast iron pipe replacement projects in Brevard County run between $8,000 and $15,000, depending on how much pipe needs replacing and where it’s located. If your pipes are under a slab and we need to tunnel, that adds to the cost. If we can use trenchless methods to reline instead of replace, it’s typically 30-40% less expensive.
The real cost comes when you wait. A burst pipe under your slab can cause $100,000+ in water damage to your floors, walls, and foundation. Insurance usually won’t cover the pipe replacement itself because that’s considered preventative maintenance, but they might cover damage from a sudden failure—if you can prove it wasn’t due to neglect.
We give you an exact quote after the camera inspection. You’ll know what needs replacing, why, and what it costs before any work starts. No surprises, no “we found more problems” upsells halfway through.
Slow drains that don’t respond to normal clearing methods are usually the first sign. If multiple drains in your home are slow at the same time, that points to a main line issue, not just a clogged sink.
Sewage smells coming from drains or in your yard mean pipes are cracked or separated. You might see soggy spots in your lawn where wastewater is leaking into the soil. Inside, you might notice water stains on ceilings or walls if pipes are leaking behind drywall.
If your Williams Point home was built before 1975, your cast iron pipes are already past their expected lifespan in Florida’s climate. Most pipes installed in the 1960s and 1970s are failing now, even if you haven’t seen obvious problems yet. A camera inspection shows you what’s happening inside the pipes before a major failure forces your hand.
In most cases, yes. We use hydro-excavation tunneling to access pipes under slab foundations without jackhammering through your floors. We create small access points and tunnel underneath to reach the pipes, then restore those access points when we’re done.
For some situations, trenchless pipe relining works. We insert a new liner inside your existing cast iron pipes, which hardens to create a new pipe within the old one. No excavation, no floor damage, and it’s significantly faster than traditional replacement.
There are cases where we do need to break through a slab—usually when pipes have completely collapsed or when the layout makes tunneling impossible. We’ll tell you upfront during the inspection which method makes sense for your specific situation. Most Williams Point homes have enough access that we can avoid tearing up living spaces, but we don’t promise what we can’t deliver until we’ve seen your actual pipe layout.
Probably not the replacement itself, but possibly the damage it causes. Most Florida insurance policies treat pipe replacement as preventative maintenance, which isn’t covered. They view it the same way they view replacing an old roof before it leaks—your responsibility as a homeowner.
However, if a pipe suddenly bursts and causes water damage to your home, insurance might cover the damage repair costs—the flooring, drywall, cabinets, and foundation work. They still won’t pay to replace the pipes, but they might cover the destruction those pipes caused.
Some policies have specific exclusions for older plumbing systems. If your insurer knows you have cast iron pipes over 40 years old and you haven’t maintained them, they can deny claims related to gradual deterioration. We provide documentation from our camera inspections that you can submit with claims. We’ve worked with homeowners on insurance claims before, and we know what adjusters typically ask for. Just don’t expect coverage for the pipes themselves unless you have very specific policy language that says otherwise.
Most residential sewer line replacement projects in Williams Point take between three and seven days from start to finish. That includes the initial camera inspection, the actual replacement work, and the final inspection with Brevard County.
Trenchless repairs are faster—often two to three days total because we’re not excavating. Full replacements under slab foundations take longer because we’re tunneling, removing old pipe, installing new PVC, testing everything, and then restoring access points.
The timeline also depends on how much pipe needs replacing. If it’s just your main sewer line from the house to the street, that’s quicker than replacing all the drain lines throughout your home. We give you a specific timeline after the inspection when we know exactly what we’re dealing with. You’ll have working plumbing throughout most of the process—we don’t leave you without bathrooms for a week.
If some sections are failing, the rest aren’t far behind. Cast iron pipes corrode at roughly the same rate throughout your system because they’re all exposed to the same conditions—Florida’s humidity, your water chemistry, and the same decades of use.
Replacing only the damaged sections means you’ll likely be calling us back in two or three years when another section fails. You pay for mobilization, permits, and labor multiple times instead of once. And if we’re already tunneling under your slab or opening walls, it makes sense to replace everything accessible while we’re there.
The exception is if you have a very localized issue—like root intrusion that damaged one specific section, and the camera inspection shows the rest of the system is still in good shape. That’s rare with cast iron in Williams Point, but it happens. We’ll show you the full inspection footage and give you options. Some homeowners choose to replace everything now for peace of mind. Others replace the worst sections and plan for the rest in a year or two. We’re not going to push you toward the bigger job if it doesn’t make sense for your situation, but we will tell you what we’d do if it was our house.
Local Resources
Useful Links
