You’re not just updating fixtures. You’re fixing problems you’ve been living with and preventing ones you don’t want to deal with later.
When we handle the plumbing for your bathroom remodel, you get water pressure that actually works in the shower. You get drains that clear fast and stay clear. You get fixtures installed to Florida code so there’s no callback from the inspector and no issue when you go to sell.
Most importantly, you get plumbing that’s built for Bonaventure’s humidity and water conditions. That means materials that won’t corrode in five years and connections that won’t leak when your home shifts. If your house was built before 1990, there’s a good chance you’re dealing with old galvanized or cast iron pipes that are already failing. Catching that now—during a remodel—saves you from tearing into finished walls later.
Drain Wizard is a family-owned plumbing company based in Brevard County. We’ve been handling bathroom remodels, fixture installations, and full plumbing system replacements across Bonaventure and the surrounding Space Coast area for nearly two decades.
Our owner, Carl, started in this trade at 16. He’s done the work himself—tub replacements, vanity plumbing, pipe rerouting—so when we walk you through your project, it’s based on actual experience, not a script. We’re licensed, insured, and we pull permits when they’re required. No shortcuts.
Bonaventure homes, especially older ones near the coast, deal with specific plumbing challenges. Humidity, shifting foundations, aging infrastructure. We see it constantly, and we know how to address it without overselling you on work you don’t need.
We start with a walkthrough of your current bathroom. What’s staying, what’s moving, what’s getting replaced. We look at your existing plumbing—supply lines, drain lines, shut-off valves, venting—and identify what needs updating before the remodel starts.
From there, we give you a transparent estimate. If your cast iron drains are rusted through or your galvanized supply lines are clogged with sediment, we’ll tell you. If they’re fine, we’ll tell you that too. Then we coordinate with your contractor or work directly with you if you’re managing the project yourself.
During the remodel, we rough in new plumbing according to your layout. That includes relocating supply lines for your vanity, running new drain lines for the shower or tub, installing backing for grab bars, and making sure everything is vented properly. Once your walls are closed up and tile is in, we come back to install your fixtures—faucets, shower valves, toilets, vanity sinks—and test everything before you use it. We handle the permit and inspection process if your scope of work requires it, which most bathroom remodels in Florida do.
Ready to get started?
Every bathroom project is different, but most involve some combination of fixture replacement, pipe rerouting, and system upgrades. If you’re swapping a tub for a walk-in shower, we’re rerouting your drain and supply lines to match the new layout. If you’re moving your vanity to another wall, we’re running new water lines and installing proper shut-offs so you can turn off the sink without killing water to the whole house.
We also handle less obvious work that matters long-term. That includes replacing old drum traps with modern P-traps, upgrading to code-compliant GFCI outlets near wet areas, installing pressure-balancing shower valves so you don’t get scalded when someone flushes, and making sure your bathroom exhaust fan is vented outside—not into your attic where it creates mold.
In Bonaventure, we’re also dealing with Florida’s building codes, which are stricter than most states because of hurricane and moisture concerns. That means proper fixture anchoring, backflow prevention, and ventilation standards. We know what the inspector is looking for, and we make sure your plumbing passes the first time. If you’re planning to install a soaking tub or a multi-head shower system, we’ll also verify your water heater can keep up and recommend upgrades if needed.
In most cases, yes. If you’re relocating fixtures, replacing drain or supply lines, or doing any work that involves opening walls, Florida building code requires a plumbing permit. That’s true across Brevard County, including Bonaventure.
The permit process protects you. It ensures the work is inspected and meets code, which matters when you sell your home or file an insurance claim. Some homeowners try to skip it to save money, but that can backfire if an inspector notices unpermitted work during a future sale or renovation.
We handle the permit application and coordinate the inspection as part of our service. It’s built into the process, so you don’t have to navigate the county’s requirements on your own. The only time you typically don’t need a permit is for basic repairs—like replacing a faucet or toilet with no changes to the plumbing layout.
The plumbing portion usually takes two to four days, depending on the scope. That includes rough-in work, inspection, and final fixture installation. If you’re doing a full gut remodel with relocated fixtures and new drain lines, expect closer to a week.
The timeline also depends on your overall remodel schedule. We rough in the plumbing after demo and framing but before drywall goes up. Then we come back after tile and paint to install the finish fixtures. Coordinating with your general contractor—or managing the schedule yourself—keeps things moving.
Delays usually happen when there are surprises behind the walls. Old cast iron pipes that are worse than expected, hidden leaks, or framing that needs adjustment. We flag those issues as soon as we see them and give you options for how to move forward. Transparency up front prevents bigger problems later.
If your home was built before 1990, your bathroom likely has plumbing that’s near the end of its lifespan. Cast iron drain lines rust from the inside out, and galvanized steel supply lines build up sediment that restricts water flow. A remodel is the best time to replace them because the walls are already open.
You should also address any slow drains, low water pressure, or leaks you’ve been ignoring. These problems don’t fix themselves, and they get worse once your new tile and fixtures are in. We also recommend upgrading to modern shut-off valves for each fixture so you can make future repairs without shutting off water to the whole house.
Florida code has changed over the years, so older bathrooms often aren’t compliant with current standards. That includes things like GFCI protection, proper venting, pressure-balancing shower valves, and backflow prevention. Fixing these during a remodel keeps you legal and makes your bathroom safer and more functional.
Yes, and it’s one of the most common requests we get in Bonaventure. Replacing a tub with a walk-in shower involves rerouting your drain line and adjusting your supply lines to match the new valve location. We also make sure your shower pan is sloped correctly for drainage and that everything is waterproofed to Florida standards.
The drain is usually the bigger consideration. Tubs and showers drain differently, and if your existing drain line isn’t positioned right, we’ll need to cut into the floor and reroute it. That’s straightforward if you have a crawl space or basement access, but most Bonaventure homes are on slab foundations, which means we’re cutting concrete. It’s doable, but it adds time and cost.
We’ll walk you through what’s involved during the estimate so there are no surprises. If your goal is a curbless shower for accessibility or aging-in-place, we’ll also make sure your floor structure and drain setup can support that design. It’s not always possible without significant work, but we’ll give you honest feedback on what makes sense for your home.
For a standard bathroom remodel with fixture replacement and minor rerouting, most homeowners spend between $2,500 and $5,000 on plumbing. If you’re doing a full gut renovation with relocated fixtures, new drain lines, and a complete re-pipe, costs typically range from $5,000 to $10,000 or more.
The variables include how much of your existing plumbing we’re replacing, whether we’re working on a slab or crawl space, and what fixtures you’re installing. A basic vanity and toilet swap costs less than a custom tile shower with body sprays and a rainfall head. Permit fees, inspection costs, and any repairs we find behind the walls also factor in.
We give you an upfront estimate after seeing your bathroom and understanding your plans. No surprises, no upselling. If we find something during the job that changes the scope—like a hidden leak or failing pipes—we’ll explain what it is, why it matters, and what it costs to fix before we do the work.
You want someone who’s licensed, insured, and has actual experience with bathroom remodels—not just service calls. Bathroom plumbing is different from fixing a leak or clearing a drain. It involves layout planning, code compliance, coordinating with other trades, and understanding how your choices now affect function later.
Ask if they pull permits and handle inspections. If they don’t, that’s a red flag. Ask how they handle surprises like failing pipes or incorrect rough-in measurements. You want someone who communicates clearly and gives you options, not someone who disappears when problems come up.
Also ask about their timeline and how they coordinate with your general contractor. A good plumber shows up when they’re supposed to, does clean work, and doesn’t leave you waiting. We’ve been doing this in Brevard County since 2007, and our reputation is built on showing up, doing the job right, and being straight with people about what their project actually needs.
Local Resources
Useful Links
