You’re not remodeling your bathroom for fun. You’re doing it because the current setup doesn’t work—outdated fixtures, poor water pressure, layouts that make zero sense, or plumbing that’s one leak away from a disaster.
Here’s what changes when the plumbing side is handled correctly from the start. Your shower pressure stays consistent, hot and cold, every time. Your drains actually drain. Your vanity doesn’t develop mystery leaks six months later because someone cut corners on the trap or supply lines.
You’re not calling someone back to fix what should’ve been done right the first time. The tile guy isn’t waiting on the plumber. The plumber isn’t undoing the tile guy’s work. Everything moves in the right order, and your bathroom works the way you expected it to when you signed off on the design.
Drain Wizard is a family-owned plumbing contractor based right here in Cocoa. We’ve been handling residential plumbing across Brevard County for years—everything from basic fixture swaps to full bathroom renovation plumbing that requires rerouting pipes, updating drain lines, and bringing older homes up to code.
Most of our bathroom remodeling work happens in homes built before 2000. That means dealing with galvanized pipe, outdated venting, subfloors that weren’t designed for today’s tile work, and layouts that don’t match modern fixture dimensions. We know what’s behind the walls in Cocoa West homes because we’ve opened enough of them.
We’re licensed, insured, and we guarantee the work. No hourly billing games. No surprise change orders for things we should’ve caught during the estimate.
First, we walk the space with you and figure out what’s staying, what’s moving, and what’s getting ripped out. If you’re doing a tub-to-shower conversion, we need to know if the drain location works or if we’re cutting concrete. If you’re adding a double vanity, we’re checking whether your supply lines and drain can handle it.
Then we map out the rough-in work—what happens before any tile, any drywall, any finish work. That’s where pipe rerouting services come in if your new layout doesn’t line up with the old plumbing. We pull permits if the scope requires it, especially if we’re moving drains or adding vents.
Once rough-in passes inspection, we step back and let your tile and flooring crews do their thing. Then we come back for fixture installation—vanity plumbing, shower valve trim, tub or shower base connection, toilet reset. We test everything under pressure, check for leaks, make sure drains flow clean, and confirm your water temperature actually matches what you set on the valve.
You walk into a finished bathroom that works exactly how it’s supposed to.
Ready to get started?
Bathroom remodeling plumbing covers everything from the main water line to the fixture. That includes shower and tub replacement, vanity plumbing with proper trap and supply setup, toilet relocation or reinstall, and any pipe rerouting services needed to make your new layout work.
In Cocoa West, most bathroom renovations involve dealing with Florida’s humidity and older plumbing systems. We replace old galvanized or polybutylene supply lines with modern materials that won’t corrode or fail. We make sure your drain lines are properly vented so you don’t get sewer gas or slow drainage. We install bathroom fixture installation that meets current code and actually fits the space you’re working with.
If your remodel involves moving a wall or changing the footprint, we handle the re-piping. If you’re adding features like a rainfall showerhead or body sprays, we size your supply lines and pressure correctly so everything works at the same time. If your subfloor is rotted from an old leak, we’ll tell you before the tile goes down—not after.
Depends on what’s behind the wall and how old your house is. If you’re swapping a toilet or vanity and the supply lines and drain connections are in good shape, you might be fine with basic bathroom fixture installation.
But if your home was built before 1995 and still has original plumbing, there’s a decent chance your shut-off valves don’t actually shut off, your supply lines are corroded, or your drain trap is leaking slow enough that you haven’t noticed yet. Most fixture upgrades in older Cocoa West homes turn into small repipe jobs once we open things up.
If you’re upgrading to a larger vanity, moving from a single sink to double, or installing a shower system with multiple heads, your existing plumbing probably won’t support it. We’ll tell you up front during the estimate what needs upgrading and what can stay.
Rough-in work usually takes one to three days depending on how much we’re moving or replacing. If it’s a straightforward fixture swap with no layout changes, we’re talking same-day or next-day work. If we’re doing a full bathroom renovation plumbing job with relocated drains, new supply lines, and vent work, plan on a few days for rough-in plus another day for final fixture installation after your tile and walls are done.
Permitting adds time if your project requires it. Most remodels that involve moving drains or adding plumbing fixtures need a permit in Brevard County, and inspection scheduling can add a few days to a week.
The bigger delay is usually coordination with other trades. If your tile guy is behind or your contractor is waiting on materials, we’re waiting too. That’s why we give you a realistic timeline up front and stay in touch as things move.
First, we check whether your existing tub drain location works for the new shower base. Most do, but some older cast iron tubs have drains that don’t line up with modern shower pans. If that’s the case, we’re rerouting the drain—which might mean cutting into the slab if you’re on a concrete foundation.
Next, we look at your shower valve. If you’re upgrading to a thermostatic or pressure-balance valve, we’re replacing the valve body and making sure your supply lines are sized correctly. If you’re adding body sprays, a rain head, or multiple outlets, we’re running additional supply lines and checking your home’s water pressure to make sure everything functions properly.
Then we handle the drain connection, set the shower base to proper slope, and install any linear drains or tile-ready pans your installer is working with. After tile and waterproofing, we come back to install the valve trim, shower head, and any accessories. It’s one of the most common bathroom remodeling projects we do in Cocoa West, and the plumbing side usually takes two to three days total.
We work with homeowners, general contractors, and tile crews all the time. Most of our bathroom renovation plumbing jobs are part of a larger remodel where someone else is handling demo, tile, painting, or electrical.
We just need clear communication on timing so we’re not stepping on each other. Plumbing rough-in happens after demo and before any tile or wallboard goes up. Final fixture installation happens after tile, paint, and flooring are done. As long as everyone knows the sequence and sticks to it, there’s no issue.
If you’re managing the project yourself and hiring trades directly, we’ll walk you through what needs to happen when. If you’ve got a general contractor running the job, we coordinate with them. Either way, our job is to handle the bathroom remodeling plumbing so your project stays on schedule and works correctly when it’s done.
Florida plumbing code requires proper venting for all drains, backflow prevention on certain fixtures, and specific clearances for toilets and showers. If you’re moving a toilet, adding a sink, or relocating a shower drain, you’re likely triggering a permit requirement in Brevard County.
One thing that catches people off guard: if we open the walls and find plumbing that’s not up to current code—even if it’s been there for 30 years—we’re required to bring it up to standard as part of the remodel. That might mean adding a vent where there wasn’t one, replacing old drum traps with P-traps, or upgrading supply line sizing.
We handle the permit and inspection process if your project needs it. The inspector checks our rough-in work before anything gets closed up, then signs off on finals after fixtures are installed. It adds a few days to the timeline, but it also means your bathroom remodeling plumbing is done legally and safely—which matters when you sell the house or file an insurance claim.
There’s no one-size answer because every bathroom is different. A basic fixture swap with no layout changes might run a few hundred dollars. A full bathroom renovation with relocated drains, new supply lines, valve upgrades, and multiple fixtures can run several thousand depending on scope and materials.
What drives cost: how much pipe we’re replacing, whether we’re moving drains or cutting concrete, what fixtures you’re installing, and how much of the existing plumbing is salvageable. Older homes in Cocoa West usually need more work because the plumbing wasn’t designed for modern fixture layouts or flow rates.
We give project-based pricing, not hourly rates. You’ll know what the plumbing portion costs before we start, and we don’t tack on surprise charges unless you change the scope mid-job. If you want a tight number, we need to see the space and understand what you’re trying to do—then we can give you a real estimate that actually means something.
Local Resources
Useful Links
