Your bathroom stops being a source of stress. No more wondering if that new shower is going to leak behind the wall in six months. No more surprise mold because someone didn’t account for Florida humidity when they roughed in the vent lines.
When bathroom renovation plumbing is done right from the start, you get fixtures that drain properly, water pressure that’s consistent, and systems designed to handle moisture without rotting out your walls. You’re not calling someone back in a year to fix what should’ve been done correctly the first time.
That’s what matters here. The shower and tub replacement you’re planning actually works. The vanity plumbing doesn’t drip under the cabinet. And when you turn on the faucet, you’re not second-guessing whether the pipes behind the drywall are going to hold up in Angel City’s climate.
Drain Wizard is a family-owned plumbing company that’s been serving Angel City and Brevard County since 2007. Carl, our master plumber, personally oversees every bathroom remodel. He’s got over 40 years of combined plumbing experience and 20 years of military service, which means he shows up on time and doesn’t leave until the job’s finished right.
We’re not the cheapest option in Angel City, and that’s intentional. You’re paying for systems that last 50+ years in Florida’s conditions, not band-aid fixes that fail when the humidity spikes. We handle the permits, coordinate the inspections, and install everything to current Florida building code.
If you’re in Angel City and you need bathroom fixture installation that won’t become a problem later, that’s what we do. No runaround, no surprises on the invoice.
First, we come out and look at what you’re working with. That means checking behind walls if needed, because the biggest budget surprises come from water damage and outdated plumbing you can’t see yet. We use camera inspections when it makes sense, so you know exactly what’s happening before we open anything up.
Once we’ve mapped out the existing plumbing, we walk through what you want. New shower? Different vanity location? That determines whether we’re doing pipe rerouting services or just swapping fixtures. We pull the permits, because Florida’s building codes aren’t optional and doing it right the first time saves you headaches during resale.
During the remodel, we rough in all new supply and drain lines to current code. That usually means PEX or copper for supply, PVC for drains, all sized correctly for Florida’s water pressure and humidity requirements. We install everything, test it, and make sure it passes inspection before we close up walls.
After that, we handle the finish work: mounting fixtures, connecting supply lines, making sure drains flow properly and vents do their job. You get a bathroom that works, and we don’t leave until it does.
Ready to get started?
A complete bathroom remodeling plumbing job in Angel City covers more than just swapping out a toilet. You’re looking at full rough-in plumbing if you’re changing the layout, which means running new water supply lines and drain lines to wherever your fixtures are going. If you’re keeping the same layout, we’re still replacing old galvanized or corroded pipes with modern materials that handle Florida’s water chemistry.
Bathroom fixture installation includes mounting and connecting everything: toilets, sinks, faucets, showers, tubs. We also handle vanity plumbing, which means proper trap installation, shutoff valves that actually work, and supply lines that won’t burst when you’re out of town. If you’re adding a walk-in shower or upgrading to a rainfall showerhead, we make sure your water pressure and drainage can handle it.
Florida’s humidity is brutal on bathrooms, so proper ventilation isn’t optional. We install vent lines that actually exhaust moisture outside, not into your attic. We also integrate shutoff valves at every fixture, so if something ever needs service, you’re not shutting off water to the whole house.
Code compliance is baked into everything. That means proper slope on drain lines, correct pipe sizing, backflow prevention where required, and water-saving fixtures that meet Florida’s current standards. You’re not getting flagged during inspection, and you’re not dealing with problems three years from now because someone cut corners.
Yes, if you’re moving plumbing lines, changing fixture locations, or doing any work that involves opening walls. Florida’s building codes require permits for this type of work, and Brevard County enforces them.
The permit process covers plumbing rough-in, fixture installation, and final inspection. It’s not just bureaucracy—it’s how you make sure the work meets code and won’t cause problems when you sell the house. Inspectors check pipe sizing, venting, drainage slope, and backflow prevention.
We handle the permit application and coordinate inspections. That’s part of the service, because trying to navigate Brevard County’s permitting process on your own is a headache you don’t need.
A full bathroom remodel with complete plumbing work typically takes two to three weeks in Angel City, depending on the scope. If you’re just doing fixture swaps with no layout changes, it’s faster—usually a few days. If you’re gutting everything and moving plumbing lines, plan on three weeks minimum.
The timeline includes demo, rough-in plumbing, inspection, closing up walls, and finish work. Weather can add delays if we’re waiting on inspections or material deliveries, and surprises behind walls—like water damage or outdated electrical—can extend the schedule.
We’ll give you a realistic timeline upfront based on what your specific project involves. We don’t rush inspections or skip steps to hit an arbitrary deadline, because that’s how you end up with leaks six months later.
Moisture management. Florida’s humidity sits between 60-70% indoors, and bathrooms are even worse. If your plumbing isn’t vented correctly or your exhaust fan isn’t doing its job, you’re creating a mold factory behind your walls.
The second issue is water chemistry. Florida’s water is hard and often contains minerals that corrode certain pipe materials faster than they would up north. That’s why we use PEX or copper for supply lines and PVC for drains—they hold up better long-term in Florida conditions.
Poor ventilation is the most common problem we see in older Angel City bathrooms. Vent lines that dump into attics instead of exhausting outside, or exhaust fans that aren’t strong enough for the bathroom size. We fix that during remodels by installing proper venting that actually moves moisture out of the house.
Yes, and it’s one of the most common requests we get in Angel City. A walk-in shower remodel usually means reconfiguring the plumbing layout, which involves moving drain lines and supply lines to the new shower location.
The drain is the tricky part. It needs proper slope to prevent standing water, and it has to tie into your existing drain system without creating venting issues. If you’re adding a rainfall showerhead or body sprays, we also need to make sure your water pressure can handle the increased demand—sometimes that means upsizing supply lines.
We handle the waterproofing and moisture barrier installation as part of the plumbing work, because Florida’s humidity will find any weak point in your shower enclosure. The goal is a walk-in shower that drains properly, doesn’t leak, and doesn’t turn into a mold problem two years from now.
We stop, show you what we found, and explain what needs to happen next. Water damage is the most common surprise during bathroom remodels in Angel City, especially in older homes where slow leaks have been going unnoticed for years.
If it’s minor—some rotted drywall or a small section of subfloor—we can usually handle it as part of the project. If it’s extensive structural damage or mold remediation, that’s a separate scope of work and we’ll walk you through what’s involved and what it costs.
The reason we sometimes recommend camera inspections before starting a remodel is to catch this stuff early. It’s better to know upfront than to get halfway through demo and discover your floor joists are rotted out. Either way, we’re not hiding it from you or covering it back up—we’re showing you exactly what’s there and giving you options.
Yes, and Florida’s building code actually requires certain water-saving fixtures for new installations. That includes low-flow toilets (1.6 gallons per flush or less) and showerheads that meet current flow rate standards.
Water-saving fixtures have come a long way. Modern low-flow toilets flush better than old 3.5-gallon models, and today’s showerheads deliver good pressure while using less water. You’re not sacrificing performance—you’re just not wasting water.
We install EPA WaterSense certified fixtures when possible, which means they meet efficiency standards without feeling like you’re showering under a trickle. It’s better for your water bill, it’s required by code for most new installations, and it’s one less thing a future buyer will flag during inspection if you sell the house.
Local Resources
Useful Links
