Hear from Our Customers
When your kitchen sink backs up or your shower won’t drain, you don’t need a sales pitch. You need someone who shows up, figures out what’s actually wrong, and fixes it without turning a simple clog into a four-hour ordeal.
That’s what you get with rooter service that’s built on 40+ years of combined experience. We’ve cleared thousands of drains across Brevard County—from tree roots cracking through old clay pipes to grease buildup in restaurant kitchens near the coast. We know what works here because we’ve seen what fails.
You’re not getting a temporary fix or a bottle of chemicals that eats through your pipes. You’re getting a clear diagnosis, upfront pricing, and work that actually solves the problem. Your drains flow. Your toilets flush. Your sinks empty the way they’re supposed to.
Drain Wizard is a family-owned business serving Melbourne and the Space Coast since 2007. We’re not a franchise with rotating techs—you’re working with a team that’s been here, knows the area, and understands how coastal Florida treats your plumbing.
Our approach comes from 20+ years of military service and over four decades of hands-on plumbing experience. That means we show up on time, we do what we say we’ll do, and we don’t leave until the job’s done right. Every job gets personal oversight because your home isn’t a number to us.
Melbourne’s aging infrastructure and coastal environment create specific challenges—salt spray, heavy rains, sand buildup, and roots seeking out moisture in older pipes. We’ve handled all of it, and we know how to fix it without overselling you on work you don’t need.
First, we listen. You tell us what’s happening—slow drain, complete blockage, recurring backups—and we ask the right questions to understand the scope before we even arrive.
When we get there, we run a diagnostic to find the actual cause. That might mean a camera inspection if we suspect roots or pipe damage, or it might be straightforward if it’s a localized clog. We explain what we find, what it’ll take to fix it, and what it costs before we start any work. No surprises.
Then we clear it. Depending on what’s blocking your line, that could mean snaking the drain, hydro jetting to blast out years of buildup, or removing tree roots that have cracked into your sewer line. We use the right tool for the job—not the most expensive one.
Once it’s clear, we test it to make sure water flows the way it should. If there’s an underlying issue that’ll cause problems later, we’ll tell you. But we’re not here to scare you into unnecessary work—we’re here to give you options so you can make the call.
Ready to get started?
You get a licensed, insured plumber who knows how to handle the specific issues Melbourne homeowners face. That includes dealing with tree roots that thrive in our humid climate and seek out even the smallest crack in your pipes. It includes understanding that homes built in the ’80s and ’90s—which make up a huge portion of Melbourne’s housing stock—are hitting the age where cast iron and clay pipes start to fail.
We handle everything from basic clogged drain repair to full sewer line cleaning. If your main line is backing up into your house, we’ll clear it fast. If you’ve got recurring slow drains that chemicals won’t touch, we’ll find out why and fix the root cause. If tree roots have infiltrated your pipes, we’ll remove them and talk through your options for preventing it from happening again.
We also work with the reality of living near the coast. Salt air accelerates corrosion. Heavy rains overwhelm older drainage systems. Sand and silt work their way into places they shouldn’t be. We account for all of that when we assess your system, and we recommend solutions that actually hold up in this environment—not just what works in a textbook.
Most drain cleaning jobs in Melbourne run between $110 and $800, depending on what’s causing the blockage and how accessible your pipes are. A simple kitchen sink clog near the trap costs a lot less than clearing tree roots from your main sewer line 50 feet from the house.
We don’t give you a price until we’ve diagnosed the problem. That’s not because we’re hiding anything—it’s because guessing over the phone leads to sticker shock later, and nobody wants that. Once we see what’s going on, we’ll tell you exactly what it costs and why.
If you need hydro jetting to clear years of buildup or roots, that’s more involved than snaking a drain. But it also lasts longer and actually solves the problem instead of just poking a hole through it. We’ll explain the difference and let you decide what makes sense for your situation and your budget.
Most drain cleaning jobs take 30 minutes to two hours, start to finish. A straightforward clog in a single fixture is usually on the faster end. A main line blockage with roots or heavy buildup takes longer, especially if we need to run a camera to see what’s happening inside the pipe.
The timeline also depends on access. If your cleanout is easy to reach and clearly marked, we move faster. If we’re dealing with older plumbing where the access points are buried or nonexistent, it takes extra time to get to the problem.
We don’t rush the job just to get to the next call. We’d rather take the time to do it right than leave you with a half-cleared drain that backs up again next week. You’ll know upfront how long we expect it to take based on what we find during the diagnostic.
Yes, and it’s one of the most common issues we see in Melbourne. Trees and shrubs are drawn to the moisture inside your sewer line, and they’ll work their way into any crack or joint they can find. Once they’re in, they expand, block flow, and eventually break the pipe if left unchecked.
Melbourne’s climate makes this worse. We’ve got mature landscaping, consistent moisture, and a lot of older homes with clay or cast iron pipes that develop cracks as they age. Those pipes were built to last 50 to 100 years, but Florida’s humidity and salt air can cut that timeline down to 25 or 30 years in some cases.
If you’re seeing recurring slow drains, gurgling sounds, or sewage odors in your yard, roots are a likely culprit. We can run a camera inspection to confirm it, then remove the roots and talk through your options for keeping them out—whether that’s regular maintenance, pipe lining, or replacement in severe cases.
Snaking a drain means feeding a flexible cable with a cutting head down the line to break through the clog. It’s effective for most basic blockages—hair, grease, small root intrusions—and it’s the faster, less expensive option. But it doesn’t remove buildup from the pipe walls, so if you’ve got years of accumulated gunk, the clog can come back.
Hydro jetting uses high-pressure water—up to 4,000 psi—to blast out everything inside the pipe. It clears roots, grease, scale, and debris, leaving the pipe as clean as it’s going to get without replacing it. It’s the better long-term solution for recurring clogs or heavily blocked lines, but it’s more involved and costs more.
We’ll recommend snaking if that’s all you need. If your situation calls for hydro jetting, we’ll explain why and what you’re getting for the extra cost. The goal is to match the solution to the problem—not upsell you on equipment we’ve got sitting in the truck.
Usually, yes. We need access to the affected drains and cleanouts, and we’ll want to walk you through what we find and what we recommend before we start any work. If the blockage is in your main sewer line and the cleanout is outside, we can sometimes handle it without you being there the whole time—but we’ll still need to connect with you to explain the issue and get approval on the work.
If you’ve got a tight schedule, let us know when you call. We’ll do our best to work around it and keep you updated throughout the process. Most jobs don’t take all day, so you’re not stuck waiting around for hours.
We also make sure to clean up after ourselves and test everything before we leave. You shouldn’t have to deal with a mess or wonder whether the problem’s actually fixed. If it’s not draining right, we don’t consider the job done.
If you’ve got sewage backing up into your house, multiple drains failing at once, or water pooling around your foundation, that’s an emergency. Those situations create health hazards, property damage, and a mess that gets worse the longer you wait. Call immediately.
If it’s a single slow drain or a toilet that’s sluggish but still flushing, that’s not an emergency—but it’s also not something you should ignore. Slow drains usually mean a partial blockage that’ll turn into a complete blockage soon. Catching it early saves you from dealing with a backup at the worst possible time.
We offer same-day service when possible, and we’ll prioritize emergency calls. Melbourne’s coastal weather can make drainage issues worse fast—heavy rain overwhelms a compromised system, and what was manageable yesterday becomes a crisis today. If you’re not sure whether it’s urgent, call us. We’ll ask the right questions and help you figure out the next step.
Local Resources
Useful Links
Other Services we provide in Melbourne
