Hear from Our Customers
You turn the tap expecting hot water. Instead, you get ice cold. Now your whole morning is thrown off, and you’re wondering how long this is going to take to fix.
Here’s what matters: getting your hot water back without the runaround. No waiting three days for a callback. No surprise fees when the job’s done. Just a licensed plumber who shows up, diagnoses the problem, and gets your water heater working again.
Most water heater issues in Canova Beach come down to a few culprits. Florida’s hard water leaves mineral deposits that choke your heating elements. Salt air from the coast corrodes tanks faster than you’d see inland. Humidity accelerates rust. These aren’t problems you can ignore—they get worse and more expensive the longer you wait.
When your water heater starts leaking, making strange noises, or just stops heating, you’re looking at either a repair or a replacement. A good plumber tells you which one makes sense for your situation and your budget.
Drain Wizard is a family-owned plumbing company based in Brevard County. We’ve been handling water heater repairs and installations across Canova Beach, Indian Harbour Beach, and the surrounding area for over 15 years.
Our team brings more than 40 years of combined plumbing experience. We’re licensed, insured, and we actually show up when we say we will. No corporate call centers. No subcontractors you’ve never met. Just local plumbers who know how coastal Florida treats water heaters.
Living near the beach means your plumbing deals with conditions most of the state doesn’t see. We’ve worked on enough water heaters in Canova Beach to know exactly what fails first and why. That experience means faster diagnosis and fewer return trips.
First, you call or contact us with the problem. Water heater leaking? No hot water? Strange noises? We ask a few questions to understand what’s going on.
Then we schedule a time that works for you. If it’s an emergency, we prioritize same-day service. When we arrive, we inspect your water heater—checking the tank, heating elements, thermostat, pressure relief valve, and connections. We’re looking for the root cause, not just the obvious symptom.
Once we’ve diagnosed the issue, we explain what’s wrong in plain terms. You’ll know what needs to be fixed, why it failed, and what it costs before any work starts. No hidden fees. No upselling you on things you don’t need.
If it’s a straightforward repair—replacing a heating element, fixing a leaking valve, flushing sediment buildup—we handle it on the spot. If your water heater is too far gone and replacement makes more sense, we’ll walk you through your options. Tank vs. tankless. Gas vs. electric. What fits your home and your budget.
After the repair or installation, we test everything to make sure it’s working properly. Then we clean up and walk you through any maintenance tips that’ll help your water heater last longer.
Ready to get started?
We repair and install all types of hot water heaters. Traditional tank models, tankless systems, gas, electric, and solar. If it heats water, we work on it.
Common repairs include replacing faulty heating elements, fixing leaking pressure relief valves, replacing corroded anode rods, and clearing sediment buildup that reduces efficiency. In Canova Beach, sediment buildup happens faster because of Florida’s mineral-heavy water. If your water heater hasn’t been flushed in a few years, there’s a good chance sediment is sitting at the bottom of your tank, forcing your system to work harder and driving up your energy bill.
We also handle full water heater installations when repair doesn’t make financial sense. If your tank is over 10 years old, heavily corroded, or leaking from the tank itself, replacement is usually the smarter move. We’ll help you choose the right size and type for your household, then install it correctly so it lasts.
Coastal homes deal with unique challenges. Salt air accelerates corrosion on metal components. High humidity creates condensation issues. Hard water causes scale buildup that shortens the lifespan of heating elements and tanks. These aren’t just minor inconveniences—they’re the reason water heaters near the beach often fail sooner than expected. Knowing how to address these issues is the difference between a repair that lasts and one that fails again in six months.
Age is the first thing to check. Most tank water heaters last 8 to 12 years. If yours is pushing that range and having problems, replacement usually makes more sense than sinking money into repairs.
Look at what’s actually broken. If it’s a heating element, thermostat, or pressure relief valve, those are affordable fixes. But if the tank itself is leaking, you’re done. Tanks can’t be repaired once they start leaking—they need to be replaced.
Consider how many issues you’ve had recently. One repair? Fine. But if you’re calling a plumber every few months for a new problem, you’re better off replacing the unit. Also factor in efficiency. Older water heaters cost more to run. A new, energy-efficient model often pays for itself in lower utility bills within a few years.
Sediment buildup is the most common reason. Florida’s hard water deposits minerals at the bottom of your tank. Over time, that sediment layer gets thick enough to insulate the heating element from the water, meaning your heater works harder and heats less.
Flushing the tank clears out sediment and restores capacity. If it’s been years since your last flush, this is likely your issue.
Another possibility is a failing heating element. If one of your two elements burns out, your water heater only operates at half capacity. You’ll notice you run out of hot water faster than usual, especially during showers or when running the dishwasher.
Undersized tanks also cause this problem. If your household has grown or your water usage has increased, your current water heater might not be big enough anymore. A 40-gallon tank that worked fine for two people won’t keep up when you add a couple of kids.
Leaks come from a few places. If water is dripping from the pressure relief valve, it’s usually because pressure inside the tank is too high. This valve is designed to release water when pressure builds up to prevent the tank from bursting. Sometimes the valve itself goes bad and leaks even when pressure is normal. That’s an easy fix.
If water is pooling around the base of your water heater, check the drain valve first. These can loosen over time or develop leaks. Tightening or replacing the valve solves it.
The worst-case scenario is a leak from the tank itself. This happens when corrosion eats through the steel. Once the tank starts leaking, there’s no repair option—you need a new water heater. Coastal homes see this more often because salt air speeds up corrosion. Regular maintenance, like replacing the anode rod every few years, helps prevent tank corrosion and extends the life of your water heater.
Simple repairs take an hour or two. Replacing a heating element, thermostat, or pressure relief valve is straightforward. We carry common parts on our trucks, so if it’s a standard repair, we handle it the same day.
Flushing a water heater to clear sediment takes about an hour, depending on how much buildup there is. If the tank hasn’t been flushed in years, it might take a bit longer.
Full water heater replacement takes longer—usually three to five hours. That includes removing the old unit, installing the new one, connecting all the plumbing and electrical or gas lines, and testing everything to make sure it works properly.
Emergency repairs get prioritized. If your water heater is leaking and causing damage, we move fast. For non-urgent issues, we schedule a time that works for you and give you a realistic estimate of how long the job will take.
Absolutely. Florida has some of the hardest water in the country, and Brevard County is no exception. Hard water is loaded with calcium and magnesium. When your water heater heats that water, those minerals separate out and settle at the bottom of the tank as sediment.
That sediment layer acts like insulation between the heating element and the water. Your heater has to work longer and hotter to get the same result, which drives up your energy bill and wears out components faster.
Sediment also causes hot spots on the bottom of the tank, which accelerates corrosion and leads to leaks. Over time, the buildup gets so thick that it reduces your tank’s effective capacity. A 50-gallon tank might only hold 35 gallons of usable water because the rest of the space is filled with sediment.
Regular maintenance helps. Flushing your water heater once a year clears out sediment before it becomes a problem. Installing a water softener reduces the minerals in your water, which protects not just your water heater but all your plumbing fixtures and appliances.
Yes. If your water heater is leaking, completely out of hot water, or causing an urgent problem, we prioritize same-day service. We understand that a broken water heater isn’t just an inconvenience—it disrupts your entire household.
When you call with an emergency, we assess the situation and give you a realistic timeframe for when we can get there. If we’re already on another job, we’ll tell you exactly when we’ll arrive instead of leaving you guessing.
Not every water heater issue is an emergency. If your water is just lukewarm or you’re noticing minor issues, we can schedule a convenient time for you. But if water is actively leaking, you’re dealing with no hot water in the middle of winter, or there’s any safety concern, we treat it as urgent and get someone out to you as quickly as possible.
Local Resources
Useful Links
Other Services we provide in Canova Beach
