Hear from Our Customers
You’re not looking for a lecture about BTUs or anode rods. You need hot water back, fast, without getting ripped off or dealing with a mess that drags on for days.
Here’s what actually matters: your mornings go back to normal. Your family stops complaining. Your utility bill drops because the new system isn’t fighting Florida’s hard water and losing. And if something does go wrong down the line, you’ve got a one-year warranty and a local number that actually picks up.
We size the unit to your household, not what’s cheapest to install. We pull the permits. We haul off the old tank. And we don’t leave until it’s tested, clean, and working exactly how it should.
We’ve been handling plumbing services across Brevard County since 2007. Carl, the owner, is a state-certified plumbing contractor with over 40 years of combined experience and 21 years of military service behind him. That means you’re not getting a subcontractor or a rotating crew—you’re working directly with someone who’s accountable.
Angel City sits on Merritt Island, where homes built between the ’70s and ’90s are hitting that 10-to-15-year mark on their water heaters. Add Florida’s mineral-heavy water and year-round use, and you’ve got the perfect recipe for sediment buildup, corrosion, and eventual failure. We’ve seen it hundreds of times.
You’re not a ticket number here. You’re a neighbor who needs their hot water back, and we treat it that way.
First, we assess what you actually need. That means looking at your household size, current usage, whether you’ve got gas or electric, and what your space allows. If your old unit is leaking or you’re constantly running out of hot water, we’ll tell you why and what fixes it.
Next, we walk you through your options—traditional tank or tankless, gas or electric—and give you real numbers. Not inflated quotes with hidden fees. Just straightforward pricing that includes the unit, installation, removal of your old water heater, disposal, and any necessary permits.
Once you’re ready, we schedule the install. Most jobs are done the same day. We shut off your water and power, disconnect the old unit, and get it out of your house. Then we install the new system, test it for leaks and proper function, and make sure everything’s up to code. Before we leave, we show you how it works and answer any questions. You’ve got hot water again, and a warranty that backs it up.
Ready to get started?
Every installation comes with full removal and disposal of your old unit, so you’re not stuck figuring out how to haul a 50-gallon tank to the dump. We handle all permits required by Brevard County, because cutting corners there just causes problems later.
You get a system that’s properly sized for your home. Too small, and you’re right back to cold showers. Too big, and you’re paying to heat water you’ll never use. We also account for Angel City’s hard water, which is loaded with calcium and magnesium. That means sediment builds up fast, and if your system isn’t designed to handle it, you’ll be replacing it again in five years instead of ten.
We install both gas and electric water heaters, traditional tanks and tankless units. If you’re near the coast, we factor in salt air exposure, which accelerates corrosion on outdoor components. And because most homes here were built decades ago, we check your existing plumbing and electrical to make sure everything integrates safely. You’re not just getting a new water heater—you’re getting a system that works with your home, not against it.
If your unit is over 10 years old and showing signs of trouble, replacement usually makes more sense than repair. At that age, efficiency drops, parts start failing more often, and you’re basically paying to keep an outdated system limping along.
Look for these red flags: rusty or discolored water, strange noises like popping or banging, leaks around the base, or inconsistent water temperature. If you’re constantly running out of hot water or your energy bills have crept up, that’s your system telling you it’s working harder than it should.
In Florida, hard water speeds up the timeline. Sediment buildup damages the tank from the inside, and once that starts, repairs are just a temporary fix. A new, energy-efficient unit will cost less to run, heat water faster, and come with a warranty. If you’re on the fence, we’ll give you an honest assessment—not a sales pitch.
A traditional tank heater stores 40 to 80 gallons of hot water and keeps it heated around the clock. It’s reliable, costs less upfront, and works well for most households. The downside is that once the tank empties, you’re waiting for it to refill and reheat.
Tankless systems heat water on demand, so you never run out. They’re more energy-efficient because they’re not constantly reheating a full tank. They also take up way less space, which matters if you’ve got a small utility room or closet. The tradeoff is a higher upfront cost and, depending on your household size, you may need more than one unit to keep up with simultaneous use—like someone showering while the dishwasher runs.
For most homes in Angel City, a traditional tank makes sense unless you’ve got a larger household or you’re renovating and want to maximize efficiency. We’ll walk through your usage patterns and help you decide what actually fits your situation, not what’s trendy.
Most installations are done in three to five hours, start to finish. That includes disconnecting and removing your old unit, installing the new one, testing everything, and cleaning up.
If we’re swapping a tank for a tank and your existing plumbing and electrical are in good shape, it’s straightforward. If you’re switching from electric to gas, or if we need to upgrade your venting or run new lines, it might take a bit longer. We’ll let you know upfront if anything will add time.
We also offer same-day service for emergencies. If your water heater is leaking or completely dead, we’ll do everything we can to get you back up and running the same day you call. No one wants to go days without hot water, and in most cases, you won’t have to.
If your current unit is over 10 years old, yes—you’ll likely see a noticeable drop. Older systems lose efficiency as sediment builds up and components wear out. They have to work harder and longer to deliver the same amount of hot water, which means higher energy costs every month.
Newer models are built to stricter efficiency standards. Improved insulation, better heating elements, and smarter controls mean less energy wasted. If you upgrade to a tankless system, the savings can be even bigger since you’re only heating water when you actually need it.
How much you save depends on your household size, usage habits, and what type of system you choose. But in general, homeowners see a 10-20% reduction in water heating costs after upgrading. Over the lifespan of the unit, that adds up. We’ll give you realistic numbers based on your specific situation so you know what to expect.
Shut off the water supply to the unit immediately. Most water heaters have a shut-off valve on the cold water line coming into the top of the tank—turn it clockwise to close it. If you can’t find it or it’s stuck, shut off your home’s main water supply. Then turn off the power (flip the breaker for electric units) or the gas supply (turn the valve to “off” for gas units).
Leaks usually mean the tank itself has corroded through, and that’s not something you can patch or repair. Once the tank starts leaking, replacement is the only real option. The longer you wait, the more water damage you’re risking—floors, walls, and anything stored nearby can all take a hit.
Call us right away. We offer emergency water heater replacement and can often get a new unit installed the same day. The faster you act, the less damage you’ll deal with. And if you’re worried about cost, we’ll work with you to find a solution that fits your budget without leaving you without hot water.
Yes. Brevard County requires a permit for water heater replacement to make sure the installation meets safety and building codes. That includes proper venting for gas units, correct electrical connections for electric models, and compliance with plumbing standards.
Some homeowners try to skip the permit to save money or time, but that’s a mistake. If you ever sell your home, an unpermitted installation can kill the deal or force you to pay for a full reinspection and bring everything up to code. It also voids most manufacturer warranties and can create liability issues if something goes wrong.
We pull the permits as part of every installation. It’s built into our process, so you don’t have to worry about paperwork, inspections, or whether the job was done right. Everything’s documented, legal, and backed by both our warranty and the manufacturer’s. That’s how it should be done.
Local Resources
Useful Links
Other Services we provide in Angel City
